VDI manual Production Technology and Manufacturing Methods - Volume 3: Production Equipment

VDI Standardisation Work - Principles and procedures

Inspection process management - Identification, classification and proof of suitability for inspection processes

Inspection process management - Identification, classification and proof of suitability for inspection processes - Corrigendum concerning standard VDI/VDE 2600 Blatt 1:2013-10

Inspection process management - Determination of the measurement uncertainty of complex inspection processes

Inspection process management - Determination of the measurement uncertainty of complex inspection processes - Corrigendum concerning standard VDI/VDE 2600 Part 2:2022-11

Measuring methods for surfaces; practical measurement of the bearing portion of a surface

Acceptance test of gear holes for spur gears with involute toothing

Measurement of gearing tools - Measuring of hobs

Tangential composite and radial composite inspection of cylindrical gears, bevel gears, worms and worm wheels

Determination of tooth contact patterns for gearings

Exchange format for gear data - Gear Data Exchange Format (GDE Format) - Definition

Exchange format for gear data - Gear Data Exchange Format (GDE Format) - Definition - Corrigendum concerning standard VDI/VDE 2610:2021-03

Testing of involute cylindrical gears; profile testing

Measurement and testing of gears - Evaluation of profile and helix measurements on cylindrical gears with involute profile

Measurement and testing of gears - Evaluation of profile and helix measurements on cylindrical gears with involute profile - Corrigendum concerning standard VDI/VDE 2612 Blatt 1:2018-11

Testing of involute cylindrical gears; tooth trace testing

Measurement and testing of gearings - Surface roughness measurement of cylindrical gears and bevel gears by means of stylus-type instruments

Measurement and testing of gears - Testing and monitoring of devices for gear measurement

Pitch and runout testing on gearings - Cylindrical gears, whormwheels, bevel gears

Accuracy of coordinate measuring machines - Parameters and their reverification - Code of practice for the application of DIN EN ISO 10360-2 for length measurement

Accuracy of coordinate measuring machines - Characteristics and their testing - Form measurement with coordinate measuring machines

Accuracy of coordinate measuring machines - Characteristics and their testing - Interim check of coordinate measuring machines with artefacts

Accuracy of coordinate measuring machines - Characteristics and their checking - Manual for the use of DIN EN ISO 10360-3 for coordinate measuring machines with additional axes of rotation

Accuracy of coordinate measuring machines - Parameters and their checking - Estimation of measurement uncertainty of coordinate measuring machines by means of simulation

Accuracy of coordinate measuring machines - Characteristics and their testing - Test process suitability of measurements with coordinate measuring machines

Accuracy of coordinate measuring machines - Characteristics and their testing - Test process suitability of measurements with coordinate measuring machines - Corrigendum concerning standard VDI/VDE 2617 Blatt 8:2018-10

Accuracy of coordinate measuring machines - Characteristics and their reverification - Acceptance and reverification tests for Articulated Arm Coordinate Measuring Machines

Accuracy of coordinate measuring machines - Characteristics and their checking - Acceptance and reverification tests of lasertrackers

Accuracy of coordinate measuring machines - Characteristics and their checking - Determination of the uncertainty of measurement for coordinate measuring machines using uncertainty budgets

Accuracy of coordinate measuring machines - Characteristics and their checking - Acceptance and reverification tests for tactile CMM measuring microgeometries

Accuracy of coordinate measuring machines - Characteristics and their testing - Acceptance and reverification tests for optical CMM measuring microgeometries according to DIN EN ISO 10360-8 and VDI/VDE 2617 Part 6.2

VDI/VDE 2617 Blatt 13: Accuracy of coordinate measuring machines - Characteristics and their testing - Guideline for the application of DIN EN ISO 10360 for coordinate measuring machines with CT-sensors - VDI/VDE 2630 Blatt 1.3: Computed tomography in dimensional measurement - Guideline for the application of DIN EN ISO 10360 for coordinate measuring machines with CT-sensors

Inspection of measuring and test equipment - Instructions for the inspection of measuring and test equipment for geometrical quantities - Uncertainty of measurement

Inspection of measuring and test equipment - Instructions to inspect measuring and test equipment for geometrical quantities - Basic principles

Inspection of measuring and test equipment - Test instruction for gauge blocks

Inspection of measuring and test equipment - Testing instruction for cylindrical setting gauges, plug gauges and ring gauges

Inspection of measuring and test equipment - Test instruction for conical gauges

Inspection of measuring and test equipment - Test instruction for cylindrical measuring pins/pins for screw threads

Inspection of measuring and test equipment - Test instruction for reference gauges with plane-parallel or spherical measuring faces and for spherical-end gauges and internal callipers

Inspection of measuring and test equipment - Test instruction for setting standards for thread micrometers

Inspection of measuring and test equipment - Test instruction for test cylinders and test mandrels

Inspection of measuring and test equipment - Test instruction for gap gauges

Inspection of measuring and test equipment - Test instruction for zylindrical screw setting play gauges and screw check plugs

Inspection of measuring and test equipment - Test instruction for cylindrical screw setting ring gauges, screw ring gauges

Inspection of measuring and test equipment - Test instruction for knife edge straight edges

Inspection of measuring and test equipment - Test instruction for straight edges

Inspection of measuring and test equipment - Test instruction for knife edge straight edges

Inspection of measuring and test equipment - Test instruction for optical flats and optical parallels

Inspection of measuring and test equipment - Test instructions for surface plates

Inspection of measuring and test equipment - Test instruction for protractors

Inspection of measuring and test equipment - Test instruction for steel squares 90°

Inspection of measuring and test equipment - Test instruction for tape measures and scales

Inspection of measuring and test equipment - Test instruction for callipers for external, internal and depth dimensions

Inspection of measuring and test equipment - Testing instruction for depth callipers

Inspection of measuring and test equipment; Test instruction for height callipers

Inspection of measuring and test equipments - Test instructions for micrometers

Inspection of measuring and test equipment - Test instruction for micrometers for screw thread measurement and other measurement purposes

Inspection of measuring and test equipment - Test instructions for micrometers with dial indicator

Inspection of measuring and test equipment - Instructions to inspect measuring and test equipment for geometrical quantities - Test instruction for micrometer heads

Inspection of measuring and test equipment - Test instruction for depth micrometers

Inspection of measuring and test equipment - Test instruction for height micrometers

Inspection of measuring and test equipment - Test instruction for internal micrometers with 2-point contact

Inspection of measuring and test equipment - Test instruction for internal micrometers and internal measuring instruments with 3-line contact

Inspection of measuring and test equipment - Test instructions for dial indicators for linear measurement with mechanical indication

Inspection of measuring and test equipment - Test instructions for lever gauges

Inspection of measuring and test equipment - Test instruction for mechanical dial gauges

Inspection of measuring and test equipment - Test instructions for electronic digital indicator gauges

Inspection of measuring and test equipment - Test instructions for electronic digital indicator gauges, Corrigendum concerning standard VDI/VDE/DGQ/DKD 2618 Blatt 11.4:2020-08

Inspection of measuring and test equipment - Test instruction for lever gauges (quicktests) for external measurement

Inspection of measuring and test equipment - Test instructions for lever gauges (quicktests) for internal measurements

Inspection of measuring and test equipment - Test instruction for bore gauges with 2-point contact

Inspection of measuring and test equipment - Test instruction for electrical linear measuring devices consisting of inductive probe and measuring device

Inspection of measuring and test equipment - Test instruction for height gauges

Inspection of measuring and test equipment - Test instruction for height gauges

Inspection of measuring and test equipment - Test instruction for horizontal length measuring machines

Inspection of measuring and test equipment - Test instruction for horizontal length measuring machines, Corrigendum concerning standard VDI/VDE/DGQ 2618 Part 17.1:2014-12

Inspection of measuring and test equipment - Test instruction for length setting instruments

Inspection of measuring and test equipment - Test instruction for special gauges and test equipment

Format for data exchange in management of measuring and test equipment - Definition of the Calibration Data Exchange format (CDE format)

Measurement of mechanical quantities - Instructions for calibration of mobile force measurement systems

Measuring rooms - Classification and characteristics - Planning and execution

Accuracy of contour-measuring systems - Characteristics and checking of characteristics - Acceptance testing and reverification testing of contour-measuring systems according to the tactile stylus method

Accuracy of contour-measuring systems - Characteristics and their testing - Determination of the uncertainty of specific contour measurements using standards/calibrated workpieces

Computed tomography in dimensional measurement - Fundamentals and definitions

Computed tomography in dimensional measurement - Influencing variables on measurement results and recommendations for computed tomography dimensional measurements

Computed tomography in dimensional measurement - Determination of the uncertainty of measurement and the test process suitability of coordinate measurement systems with CT sensors

Computed tomography in dimensional measurement - Determination of the uncertainty of measurement and the test process suitability of coordinate measurement systems with CT sensors - Corrigendum concerning standard VDI/VDE 2630 Part 2.1:2015-06

Form measurement - Stability monitoring of form measuring systems

Form measurement - Examples for measurement and analysis conditions

Form measurement - Determination of the uncertainty of form measurements

Form measurement - Determination of the uncertainty of form measurements - Corrigendum concerning standard VDI/VDE 2631 Part 10:2014-12

Form measurement - Spectral analysis (Fourier analysis, harmonic analysis)

Optical form measurement - System requirements - Standard form

Characteristics of force transducers - Terms and definitions

Characteristics of torque transducers

Capability test for fastening technology - Machine capability test - MCT

Capability test for bolting technology machines - Process capability test (PFU)

Torque measuring devices/measuring chains - Minimum requirements in calibrations

Torque measuring devices/measuring chains - Minimum requirements in calibrations - Corrigendum concerning standard VDI/VDE 2646:2019-12

Type test of nutrunning tools - Torque and torque/angle checking

Sensors and measuring systems for rotation angle measurement - Instructions for traceable calibration - Directly measuring rotation angle measuring systems

Sensors and measuring systems for rotation angle measurement - Instructions for traceable calibration - Indirectly measuring rotation angle measuring systems

Tranducers and measuring systems for measurement of angle - Instructions for traceable calibration - Indirect measure angle measuring systems

Sensors and measuring systems for rotation angle measurement - Instructions for traceable calibration - Basics

Rotary tools for bolted connection - Guideline for comparative power-measurements of hydraulic impulse tools

Characterization and measurement of cutting edges - Terms, characteristics, and parameters

Optical measurement and microtopographies - Calibration of interference microscopes and depth measurement standards for roughness measurement

Optical measurement of microtopography - Calibration of confocal microscopes and depth setting standards for roughness measurement

Optical metrology of microtopographies - Calibration of interferometers and interference microscopes for form measurement

Determination of geometrical quantities by using of scanning probe microscopes - Calibration of measurement systems

Mechanical devices for automation equipment - Grippers for manipulators and industrial robots

Mechanical devices for automation equipment - Guidance mechanisms

CVD diamond tools - Categorisation, production, and characterisation

CVD diamond tools - Applications

Cut-to-cut time, automatic tool change

Pallet change time and cut-to-cut time under automatic pallet change

Characteristic values of numerically controlled production plants - Positioning time, spindle acceleration time, waiting time

Assembly- and handling units - Handling functions, handling units, terminology, definitions and symbols

Assembling and handling; characteristics of industrial robots; application-related characteristics

Assembling and handling; characteristics of industrial robots; testing of the characteristics

Minimum restrictions for application of fastening systems and tools - Applications in the automotive industry

Minimum requirements for application of fastening systems and tools - Applications in plant construction, mechanical engineering, equipment manufacturing and for flange connections in components under pressure boundary

Application of thermography to maintenance diagnostics - Equipment technology

Taking up of sheet metal parts in large stamping dies

Hydraulic cam Systems (HCS)

Pressure pins in large stamping and forming dies

Nitrogen gas springs in large stamping dies

Nitrogen gas springs in large stamping and forming dies - Safety instructions for usage

Nitrogen gas springs <Durchmesser> 19 mm and <Durchmesser> 25 mm in large stamping dies

Nitrogen gas springs in large stamping dies - Nitrogen gas springs with enhanced force and low height

Nitrogen gas springs in large stamping dies - Nitrogen gas springs with enhanced force

Nitrogen gas springs for large stamping dies - Mounting versions

Spring plungers with helical compression steel spring or nitrogen gas spring

Heat-transfer systems with organic heat-transfer media - Operation, maintenance and repair

Determination of permissible speed (rpm) of lathe chucks (jaw chucks)

Cast steel wall thicknesses in large stamping and forming dies - Design references for tools with more than 1000 mm side length

Cast steel wall thicknesses in large stamping and forming dies - Design references for dies with more than 1000 mm side length

Acceptance test requirements of deep hole drilling machines with one or more spindles

Technical design guidelines for machine tools; A - general information and transaction of orders

Technical design guidelines for machine tools; M-mechanical equipment

Information on applicability of hard cutting materials for machining by chip removal

Design and use of die buttons in large stamping dies

Trim steels for large stamping dies

Guide pillars with lead-in chamfer in large stamping dies - Supplement to DIN 9833 und ISO 9182-3

Sliding elements in large stamping dies

Sliding elements in large stamping dies

Shoulder screws, shoulder bushes in stamping and forming dies

Locking pins for large stamping and forming dies

Lifting elements for large stamping and forming dies

Lifting elements for large stamping and forming dies - Corrigendum concerning standard VDI 3366:2021-07

Mechanisation elements in stamping and forming dies

Mechanized elements in stamping dies - Elements attached to dies

Mechanized elements in stamping dies - Mechanized elements which are part related

Mechanized elements in stamping dies - Die attached elements for blank dies

Punches with cylindrical head

Lubrication of large stamping and forming dies

Design instructions for cast iron and cast steel dies

Manufacture of pressing tools for aluminium sheet parts and production of aluminium sheet parts

Cam units for large press dies

Heel guidings in large stamping and forming dies

Heel guidings in large stamping and forming dies

Materials for trimming and forming dies

Realization and documentation of sheet metal forming simulation - System requirements

Realization of benchmarks for FE simulations of sheet metal forming - Planning, realization, evaluation, interpretation and documentation of practical tests

Numerically controlled machine tools; standardized information on inquiry, offer and order

Statistical control of exactly working and positioning of coordinate drilling machines and machining centers

Statistical examination of exactly working of grinding machines; fundamentels

Statistical examination of exactly working of grinding machines; external cylindrical grinding machines with center points; plunge-cut grinding operation

Statistical examination of exactly working of grinding machines; centerless external cylindrical grinding machines

Statistical examination of exactly working of grinding machines; internal grinding machines

Statistical examination of exactly working of grinding machines; flat grinders